Advantage: Power Tower Series, Cooling Towers
The picture above may not represent the exact item you require.
Please contact us for more information on your item.
Through extensive development and testing, the Power Tower cooling tower cells are space efficient, highly versatile and have a lower first cost and operating cost when compared to other cooling methods.
Advantages Power Tower is simple to operate with easy to understand controls and utilizes energy-efficient evaporative cooling to provide cooled water for a variety of industrial applications and equipment. Power Towers receive warm water returning from the process and evenly distributes it over the wet deck using its water distribution header and spray nozzles. The direct drive fan draws air from the inlet louvers, through the wet deck and out the top of the tower.
The falling water and counter airflow causes a portion of the warm process water to evaporate. The small amount of water evaporating cools the remaining water.
Under design conditions about 1% of the water flow rate evaporates to achieve the cooling affect desired. For more information please see the attached brochure and contact Southgate Process Equipment Ph: (770) 345-0010 / Email: firstname.lastname@example.org
Maintains full capacity & temperature control stability over a wide range of wind, air temperature and humidity extremes
Capacity range is from 45 to 540 tons
The nominal rating condition is cooling 3 gallons per minute per ton of capacity from 95°F to 85°F at 78°F wet bulb
All wetted surfaces are made of fiberglass, stainless steel, PVC
or other non-rusting material
Materials are designed for constant water contact under hot and cold air temperature extremes
Fiberglass shells up to 1/2″ thick in structural areas assure mechanical integrity and long service life
Power Tower cooling tower cells are space efficient, highly versatile and have a lower first cost and operating cost when compared to other cooling methods.